GOOT RX-852ASHigh Power Lead-free Soldering Station
  • 概述
  • 参数
  • 应用范围
  • 资料
  • 相关产品
  • 品牌
  • 视频

    1、Superb Heat Recovery

    Excellent heat recovery is achieved with the combination of a 150W-compact high-output-heater and a high-sensitivity-sensor.Tackles tasks previously impossible without such power.

    2、Fastest in its Class

    Reaches 350°C in only 14 seconds. (Only 6 seconds when using RX-80HRT tips)

    3、Easy-change tip (PAT. P)

    Slide-change tip. No tools or heat resistant pads needed.

    4、Heater and Sensor All-in-one Tips

    All-in-one tips with the heater and sensor built in making maintenance and tip changing as easy as possible.

    5、Extra Thick Tip Coating for Lead-free Soldering

    All tips with extra thick coating to prevent erosion caused by the use of lead-free solder.

    6、RX-80HRT tips also usable

    40 shapes of tip available, including the 25 optional tips for the RX-802AS.

    7、High / Low Temperature Alarm

    An alarm sounds (to alert the user) when the temperature goes outside (above or below) the maximum or minimum temperature settings. High/low setting range 3°C–100°C.

    8、Intelligent Sleep Function (PAT.)

    Automatically lowers the tip temperature when inactive for a preset period of time, preventing overheating. User definable preset time. (Can be used in conjunction with Shutdown function.)

    9、Sleep Release Function (PAT.P)

    Sleep mode can be exited (at any time) by bringing the tip into contact with the wet sponge to cause temperature fluctuation. (Effective when temperature is set above 100°C)

    10、Shutdown function

    The unit automatically shuts down when not used for a preset period of time. This means that the unit turns itself off, if you forget to!

    11、Advanced Alarm Function (To prevent overheating)

    Alarm sounds if the iron is left in contact with the component longer than the specified/set time. This prevents inexperienced operators from overheating the component, and in turn helping quality control.

    12、Calibration Function (PAT.)

    The calibration function digitally offsets the difference between the tip temperature and the temperature shown by a tip thermometer being used.

    13、New ergonomic design soldering unit

    New ergonomically designed soldering unit provides comfortable usability, easy handling and a shorter distance from grip to tip.

    14、Handpiece rubber grip (Anti-static)

    Four colours to differentiate between stations, tasks or types of solder being used.
    Note: Cannot be used with RX-802ASPH


    型号

    RX-852AS

    额定电压

    100V   AC 50/60Hz

    耗电量

    160W

    电烙铁电压/功率

    24V   AC/150W

    温度设定范围

    50〜450℃

    尺寸

    电烙铁

    全长174mm (除带地线插头)

    本体

    194(L)×116(W)×105(H)mm

    重 量

    电烙铁

    约39g (除电源线)

    本体

    约4.8kg (除电源线)

    漏电电压

    2mV以下

    地线电阻

    2Ω以下

    电烙铁至控制部线长

    1.2m

    电源线长度

    1.   5m (3芯、带地线插头)

    附件

    配专用焊台(ST-20)、标准焊嘴(5D) 、RX-85HRT


Follow us:

Copyright © 1999-2024 Hapoin Enterprise 沪 ICP 备 11051220 号 沪公网安备 31010502002237号All Rights Reservedbottom.png