MALCOM SRS-2Reflow SimulatorI And Warpage Measurement System
  • Summary
  • Parameter
  • Application
  • Data
  • Related
  • Brand
  • Video

    SRS-2 Feature:

    · Measure the warping of a part or board due to heat

    · A laser on the underside measures the displacement in both X and Y-axis directions

    · 19 point configuration and selectable temperature settings allow for the measurement of warping trends

    · Dedicated software analyzes the displacement measurement data

    · Optional VIDEO CAMERA CAPTURE SYSTEM enables you to observe and record the melting process of the solder

    SRS-2 Specifications:

    Applicable Circuit BoardUp to 70W x 70L x 10H mm
    Outer Dimension652W x 411D x 425H mm
    Heating MethodUpper-face : Extreme infrared radiation with hot air
    Lower-face : Extreme infrared radiation
    Cooling MethodFlowing air or N2 air (with flow adjustable valve)
    Power Supply200V 50/60Hz 1.6kVA 3Phase
    Air0.3 - 0.5MPa 100 liter/min (Maximum)
    O2 Concentration in Furnace (when using N2)100ppm minimum
    PCB InstallationFlat plate system (heat resistant glass or ceramic coated plate)
    Upper-HeaterHot air heater  : Approx. 675W 
    (Approx.75W x 3本 x 2lines+Approx.225W x 1本)
     * Deviation to the standard nozzle can be set.
    Extreme infrared radiation heater : Approx. 360W
    Lower-HeaterExtreme infrared radiation heater : Approx. 360W
    Temp. Accuracy5C maximum
    (Maximum range : 50(W) x 50(L)mm in the center)
    Measuring Temp. RangeRoom temp. - 330C
    Measuring Points3points
    N2 Gas Supply Function100 liter/min. with flow regulating valve during operation
    WeightApprox. 50kg

Follow us:

Copyright © 1999-2017 Hapoin Enterprise 沪 ICP 备 11051220 号 沪公网安备 31010502002237号All Rights Reservedbottom.png