S-100Features：

(1) Sure soldering can be obtained.

(2) This flux is little smoke and smell in soldering and free from corrosion of neutrality.

(3) Flux residue has excellent in electrical insulation.

S-100State：

SOLDERITE S-100 is liquid of light yellowish brown and flux residue is yellowish brown transparent.

SOLDERITE S-100 is a non-corrosive flux that can be used not only for soldering general electronic equipment but also for electronic parts.

• TAMURAEC-19S-8
  
  Post-flux for printed circuit boards mounted with chip parts for Pb-free soldering.
• TAMURAULF-37
  
  TAMURA ULF-37 Flux
• TAMURAS-36
  
  S-36 is a new type post flux for precision electronic equipment that requires particularly high reliability. Genrally, in the process of soldering precision electronic equipment, it is easy to damage the function of circuitry element by chemical action of flux and/or to degrade its reliability by contamination. To solve these problems, flux residue is required to be perfectly free from corrosion, excellent in electrical insulation and not to affect at all the electrical characteristics and reliability of the circuit. Solderite S-36 is the flux developed with special synthetic resin perfectly to satisfy the features of these requirements. Besides, this Solderite S-36 has quite stabilized solderability naturally and its color tone is so thin with least color changs. These features ensure widely to be applied to thick film hybrid IC electrode that requires high reliability in addition to general precision electronic equipment.