CF-110VMS Features:

· The product will solve troubles in soldering such as non-wetting and bridge defect in the soldering of printed circuit boards mounted with chip parts and discreet parts

· With little flux residue and color tone light nearly achromatic, it is free from stickiness

· Excellent in obtaining mat effect on soldered surface

· Excellent in electric insulation with flux residue being non-corrosive

· Foaming or spraying will provide uniform flux coating

CF-110VMS Parameter:

• TAMURAEC-19S-8
  
  Post-flux for printed circuit boards mounted with chip parts for Pb-free soldering.
• TAMURAULF-300R
  
  ULF-300R is a ultra low residue type post-flux developed for automatic soldering of printed circuit boards mounted with chip parts and discreet parts. The flux have little flux residue．Furthermore, the flux residue is excellent in reliability so that it is most appropriate for soldering aim at non-washing of flux.
• TAMURAULF-210R
  
  ULF-210R is a light-colored, highly heat-resistant, special synthetic resin type ultralow residue flux developed for automated soldering of printed wiring boards mounted with chips general discrets.
• TAMURACF-110VH-2A
  
  Tamura CF-110VH-2A Flux
• TAMURACF-030AGM-3
  
  CF-030AGM-3 is a high performance,mat type flux developed for automatic soldering using low silver Pb-free solders and an excellent solderability can be obtained with it in Pb-free soldering.
• TAMURAEC-15-7
  
  EC-15-7 is a high performance, low-residue type flux developed for automatic soldering using Pb-free solders and an excellent solderability can be obtained with it in Pb-free soldering.