ASEC 39-ICH09Underfill散热底填胶
39-ICH09_ASEC underfill散热底填胶的特点: |
This product which balanced flowability & Heat sink performance. 2.2W/m/K |
Low CTE to provide good thermal shock performance. |
39-ICH09_ASEC underfill散热底填胶Liquid state： |
Property | Typical Value | Test Condition |
Chemical | Epoxy |
|
Viscosity | 29,500 mPa・s | @25degC B type Viscometer |
Filler Size | 10μm | Maximum size |
Flowability | 10mm | GAP50μm Glass/Glass 100x60sec |
39-ICH09_ASEC Underfill散热底填胶Cured state： |
Property | Typical Value | Test Condition |
Storage Modulus | 18 Gpa | 25˚C |
Tg | 110 ˚C |
|
CTE α1/α2 | 15/58 ppm/˚C |
|
Moisture Absorption | 0.5% | PCT 2atm, 20hr |
Thermal conductivity | 2.2 W/m/K |
|
