GOOT RX-802ASSoldering Station
  • 概述
  • 参数
  • 应用范围
  • 资料
  • 相关产品
  • 品牌
  • 视频

    Feature:

    1.     Excellent heat recovery

    Compact, high output heater (72W) combined with a high sensitivity sensor means there is almost no temperature fluctuation during heavy load continuous operation.

    2. Fastest in its class

    With the new slide-change tip there is no need for heat-resistant pads or tools when changing the tip. (PAT.P)

    3.  All-in-one tip design

    Heater and sensor included in the tip making maintenance and changing tips easy.

    4.  Anti-oxidation tip(PAT.)

    Tips designed with fine solder coated grooves to stop oxidation. (RX-80HRT-BM only)

    5.  Reduced heat-up of soldering unit grip

    Newly designed thermal insulation soldering unit construction (PAT.P) to reduce heat transfer to the grip.

    6.     Thick iron plating for lead-free soldering

    All tips with thick iron plating to prevent slow erosion caused by lead-free soldering.

    7.     High/Low Temperature Alarm

    An alarm sounds (to alert the user) when the temperature goes outside (above or below) the maximum or minimum temperature settings. High/low setting range 3¡ëC~100¡ëC.

    8.     Intelligent Sleep Function (PAT.)

    Automatically lowers the tip temperature when inactive for a preset period of time, preventing overheating. User definable preset time. (Can be used in conjunction with Shutdown function.)

    9.     Intelligent Sleep Function (PAT.)

    Automatically lowers the tip temperature when inactive for a preset period of time, preventing overheating. User definable preset time. (Can be used in conjunction with Shutdown function.)

    10.   Sleep Release Function (PAT.P)

    Sleep mode can be exited (at any time) by bringing the tip into contact with the wet sponge to cause temperature fluctuation. (Effective when temperature is set above 100°C)

    11.   Shutdown function

    The unit automatically shuts down when not used for a preset period of time. This means that the unit turns itself off, if you forget to!

    12.   Advanced Alarm Function (To prevent overheating)

    Alarm sounds if the iron is left in contact with the component longer than the specified/set time. This prevents inexperienced operators from overheating the component, and in turn helping quality control.

    13.   Calibration Function (PAT.)

    The calibration function digitally offsets the difference between the tip temperature and the temperature shown by a tip thermometer being used.

    14. New ergonomic design soldering unit

    New ergonomically designed soldering unit provides comfortable usability, easy handling and a shorter distance from grip to tip.

    15. Handpiece rubber grip (Anti-static)

    Four colours to differentiate between stations, tasks or types of solder being used.
    Note: Cannot be used with RX-802ASPH


    型号

    RX-802AS

    额定电压

    110,   120, 130, 220, 230, 240V AC

    耗电量

    80W

    电烙铁电压/功率

    24V   AC/72W

    温度设定范围

    50—450℃

    尺寸

    Soldering   Unit

    全长158mm (除带地线插头)

    电烙铁部

    146(L)   X 115(W) X 98(H)mm

    重 量

    Soldering   Unit

    约28g (除电源线)

    电烙铁部

    约1.8kg (除电源线)

    漏电电压

    2Ω以下

    地线电阻

    Less   than 1Ω

    电烙铁至控制部线长

    2Ω以下

    电源线长度

    1.2m 3芯、带地线插头

    附件

    电烙铁 ST-20、标准焊嘴


Follow us:

Copyright © 1999-2017 Hapoin Enterprise 沪 ICP 备 11051220 号 沪公网安备 31010502002237号All Rights Reservedbottom.png