TAF40-15PF Feature:

· Painting efficiency has been improved as compared with conventional units

· Painting efficiency has been further improved with the "edge off" function(Conventional units approximately 50% R Approximately 82%)

· Maintenance frequency has been reduced to about 1/3 of the conventional units, due to the decrease in splash resulting from painting efficiency improvement(Amount of splash in conventional units, approximately 50%, reduced to about 18%)

· A variety of ideas for the reduction of running costs(preheater efficiency, sheet filter, blower efficiency, etc.)

· The nozzle reciprocation speed is automatically determined depending on the transfer speed and width of the circuit board

· The nozzles and inside of pipes are automatically cleaned at the finish of operation

TAF40-15PF Parameter:

• TAMURAGNV51-648PM
  
  Designed for domestic customers, highly cost-effective. Can be used for not only nitrogen reflow and air reflow also
• TAMURATAF40-12F
  
  Painting efficiency has been improved as compared with conventional units.
• TAMURAHC33-39NF
  
  Compact and tight-sealed M.T.S.(multi-throat stabilizer)