The compact vibration generator is used for calibration of a vibrometer, measurement of mechanical impedance, excitation source for modal analysis and reliability test of a small light specimen. In particular, EMIC uses the world's first ceramic armature for the 512-D and 513-D vibration generator,making it possible to excite up to high frequency of 30 kHz (513-D can excite up to 24 kHz).

●Calibration of Vibrometer

●Structure Analysis & Transfer Function Measurement

●Mechanical Impedance Measurement

Lineup

●511-A Modal Analysis

●512 Series Standard Model (49N, 64N) High Frequency Model (30kHz, 49N, 64N)

●513 Series Standard Model (98N, 147N, 196N) High Frequency Model (24kHz, 98N, 147N)

●9514 Series 300N, 500N

●Σ9515 Series (0.6kN, 2kN)

• EMICEnergy Saving System"ECO-Vibe neo"
  
  EMIC Vibration Testing System Energy Saving System"ECO-Vibe neo".ECO-Vibe neo has been designed for an eco-friendly vibration test system.
• EMICHorizontal Slip Table
  
  EMIC Auxiliary Table, Attachment Horizontal Slip Table.Horizontal Slip Table System is the most familiar option to perform a horizontal testing of a bulky unit or an article of which configuration cannot be changed.
• EMICCompact vibration Generator
  
  EMIC Compact vibration Generator.​The compact vibration generator is used for calibration of a vibrometer, measurement of mechanical impedance, excitation source for modal analysis and reliability test of a small light specimen.