MALCOM DIP TESTER DS-03 HAPOIN

Established in November 1999，we are committed to introducing high technology equipments, precision instruments, advanced production materials in order to improve the product quality at the domestic electronic manufacturing industries.

About Hapoin
Established in November 1999，we are committed to introducing high technology equipments, precision instruments, advanced production materials in order to improve the product quality at the domestic electronic manufacturing industries.
News & CSR
Established in November 1999，we are committed to introducing high technology equipments, precision instruments, advanced production materials in order to improve the product quality at the domestic electronic manufacturing industries.
Product service
Established in November 1999，we are committed to introducing high technology equipments, precision instruments, advanced production materials in order to improve the product quality at the domestic electronic manufacturing industries.
Contact Us
- Contact Us
- Talent Construction
Established in November 1999，we are committed to introducing high technology equipments, precision instruments, advanced production materials in order to improve the product quality at the domestic electronic manufacturing industries.

Product service

precision measurement
Viscometer
Coplanarity Measurement
SMT Scope
Flying Probe
Solderability
Temperature
Welding
PullTester
optical detecting instrument
Microscope
Thermometer
SPI
X-RAY
Weathering
Production
Soldering Materials
Repair equipment
Equipment accessories

MALCOM DS-03DIP TESTER

Summary
Parameter
Application
Data
Related
Brand
Video

Feature

・Obtain various data such as Temp, Time and etc. on soldering performance in one stroke.

・Preheat temperature (temperature on underside of the board caused by preheaters.)

・Soldering temperature of the 1st soldering tank

・Dip time of the 1st soldering tank

・Soldering temperature of the 2nd soldering tank

・Dip time of the 2nd soldering tank

・Confirmation of flux height, solder height and flux dryness

・Total dip time of the 1st and 2nd soldering tanks

【DISCONTINUED】

Item	Specification
Model Name	DS-03
Cold contact point compensation	Automatic compensation with platinum temperature measuring resistor
Ambient temperature	5 minutes or less OK at ambient 120C
Battery to use	S-006P 9VDC, 1 piece
Usable time	More than 10 continuous hours
Life of sensor mounting plate	More than 5,000 times at soldering temperature 250C and dip time 5 sec.
Outer Dimension	94W x 230D x 51H mm
Weight	840g (without battery)

Item	Sensor	Display method	Measuring range	Accuracy/Contents
Soldering Temperature	K sheath thermocouple	Digital LCD 3-digit	0 - 300C	+/-2C
Temperature on the underside of board	K thermocouple		50 - 300C	+/-2C
Dip time	Electrode		0 - 10.0sec	+/-0.2sec
Flux Dryness	Electrode (resistance)	LED (NG--red, OK--green)	10KΩ - 5MΩ	2Φ electrode intervals of 4mm
Flux Height	Electrode		With reference to underside of board 0 - 6mm	Scale resolution 1mm
Solder Height	Electrode		With reference to underside of board 0 - 6mm	Scale resolution 1mm

* The above specifications are subject to change without notice.

The Dip Tester enables you to set up and maintain the flow soldering equipment easily and accurately. This has been developed with using the latest technology and expertise in soldering equipmet.