HAKKO FR-803BHOT AIR PENCIL
  • 概述
  • 参数
  • 应用范围
  • 资料
  • 相关产品
  • 品牌
  • 视频

    Feature

    Rework System blowing hot air at MAX 500°C

    Enables to combine with Preheater (HAKKO FR-820)

    Upgraded power MAX 500°C/930°F for lead-free soldering

    Upgraded working efficiency combined with Preheater (HAKKO FR-820)
    Operating HAKKO FR-820 with buttons of FR-803B
    Shorten operating time by heating SMD components from top and bottom
    Automatically cool down after turning off the power
    Easy attachment with included connecting cord

    3-Step Temperature setting
    Protect SMD components by setting temperature and time on Step 1-3(Set range Temperature:100 to 500°C/200 to 930°F, Time: 0 to 300 sec. (0 to 5 minutes))
    Automatic cool-down function works after Step 3(at AUTO Mode)
    Enables to register 50 profile data
    AUTO Mode allows control temperature, air-flow, and time.

    Comes with an offset function

    Power saving function(30min/60min/∞ can be selected)

    Card lock function to lock the setting details

    ESD safe by design

    Control hot air temperature with Temperature Probe (equipped with HAKKO FG-101, HAKKO FG-100)

    Controlling the temperatures of Hot Air Rework System and workpiece using the Temperature Probe
    Measure temperatures of Hot Air Rework System and workpiece using the Temperature Probe for Hot Air Rework System (No. C1541) and thermometer (HAKKO FG-100/HAKKO FG-101) to protect the workpiece.

     


    l Vacuum pickup is built-in

    Pad Material

    Conductive silicone rubber

    Heatproof temperature

    Approximately 180ºC

    Replacement time

    When heat deforms it


Follow us:

Copyright © 1999-2017 Hapoin Enterprise 沪 ICP 备 11051220 号 沪公网安备 31010502002237号All Rights Reservedbottom.png